Configurations - WEG EAN1 Guía De Instalación, Configuración Y Operación

Analog Input Expansion Module and Encoder Simulator - EAN1
Specification of the encoder simulator:
Maximum frequency: 250 kHz.
Output voltage: according to power supply (5 to 24 Vdc).
Output current: 50 mA.
Consumption: according to the load (with no load = 15 mA).

6 CONFIGURATIONS

In order to configure the digital inputs and outputs, as well as the analog input and encoder
simulator, refer to the programming manual of the SCA06.
12 | SCA06
Table 5.2: XA133 specification – Encoder Simulator
Connector XA133
Pin
1
2
3
4
5
6
7
8
9
Frame
Function
B
AN
A
V+ (5 to 24 Vcc)
Ground
GND
NN
N
BN
Ground