Accessory Installation - WEG EAN1 Guía De Instalación, Configuración Y Operación

Analog Input Expansion Module and Encoder Simulator - EAN1

4 ACCESSORY INSTALLATION

The optional modules are easily connected to the servo drive SCA06 through the plug-and-play
concept. However, some caution must be taken:
1. Turn off the servo drive control module.
2. Remove the slot protective cover, as shown in figure 4.1.
Figure 4.1: Remove the protective cover
3. Connect the accessory to the appropriate slot, as illustrated in figure 4.2. Remember that the
accessory EAN1 can only be connected to slot 3.
Figure 4.2: Accessory installation
8 | SCA06