Hardware Characteristics - WEG EAN1 Guía De Instalación, Configuración Y Operación

Analog Input Expansion Module and Encoder Simulator - EAN1

5 HARDWARE CHARACTERISTICS

The accessory EAN1 has the following hardware characteristics:
1 analog input with range of -10 V to +10 V and resolution of 14 bits.
„
3 optocoupled digital inputs.
„
1 optocoupled digital output.
„
Encoder simulator wit channels A, AN, B, BN, N and NN.
„
Figure 5.1 shows the accessory EAN1.
sa131 – DIP switches.
ON: Current input (4 mA to 20 mA or 0 mA to 20 mA, according to the settings in the corresponding
parameter. For further details, refer to the programming manual).
OFF: Voltage input (-10 V to +10 V).
The input and output specifications, as well as the description of the pins of the corresponding
connector, can be found in
encoder simulator is shown in
10 | SCA06
Figure 5.1: Accessory EAN1
table 5.1. The description of the pins of the connector used for the
table 5.2.