General Information; Package Content - WEG EAN1 Guía De Instalación, Configuración Y Operación

Do not perform any high pot tests with the servo drive!
NOTE!
Servo drives may interfere in other electronic equipment. Follow the recommended
procedures to minimize these effects.
NOTE!
Read the user's manual completely before installing or operating the servo drive.

2 GENERAL INFORMATION

This guide contains information regarding the installation, configuration and operation of the
EAN1 optional module. This module is an analog input expansion and encoder simulator used
by the SCA06.
ATTENTION!
De-energize the control module before inserting or removing the accessory.
NOTE!
The accessory EAN1 can be connected to slot 3 only.

3 PACKAGE CONTENT

Accessory module in anti-static package.
„
Installation, configuration and operation guide.
„
Analog Input Expansion Module and Encoder Simulator - EAN1
If necessary, contact WEG.
SCA06 | 7