Technical
*********
service
*********
name:
Technical
xxxxxxxxx
service
xxxxxxxxx
name:
Technical
000000000
service
phone
000000000
number:
Technical
000000000
service
phone
000000000
number:
Remove name and
phone number?
Name and phone number
PCA fi rmware version: v.0.00
Display fi rmware version: v.0.00
- COFFEE BOILER CONFIG: Through this menu we can edit the settings and visualisation for
all data related to the temperature, and sensitivity of the level sensor.
Num. groups
Cappuccinator
Sensibility
...
...
Temp. units
Boiler temp.
2 groups
Number
3 groups
of groups:
Enabled
Cappuccinator:
Disabled
Hot milk
Cappuccinator
Frothed milk
Air and steam
temperatures:
Off set
Hot milk
80
ºC
temp.:
Frothed
70
ºC
milk temp.:
Add air
30
ºC
to the
steam at:
INSTALLATION AND OPERATION MANUAL
were removed.
Increasing or decreasing, we pass through all the characters,
in the highlighted position. On confi rmation, we move on to
the next character, until the last is confi rmed.
Once the text is edited, we confi rm it if correct, or cancel
the new text without saving.
Increasing or decreasing, we pass through all the characters,
in the highlighted position. On confi rmation, we move on to
the next character, until the last is confi rmed.
Once the text is edited, we confi rm it if correct, or cancel
the new text without saving.
Confi rmation or cancellation of elimination of technical
services data.
Elimination process satisfactorily completed.
The screen shows the fi rmware version for our control unit and
display.
Select and modify the number of groups available for our
machine.
Through this screen we can enable or disable the frother function,
if our machine has an automatic frother.
Through this screen we can go into the various functions of the
frother to change the temperatures.
Select the maximum temperature the milk will acquire
when heated.
Select the maximum temperature the milk will acquire
when frothed.
Select the temperature from which air, mixed with steam,
is to be injected, to froth the milk.
IBERITAL
101