Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
3. Unit description
2
1
1. Cuff
2. Cuff line
3. Cuff connector
4. Display
5. Connection for mains part
6. Memory button
7. START/STOP button
8. Function buttons
9. Scale for classifying the measurements
10. Connection for cuff connector
4. Preparing the measurement
Insert the batteries
• Open the battery compartment lid.
• Insert four 1.5 V AA (alkaline type LR6) batteries. Make sure that the bat-
teries are inserted with the correct polarity, according to the label. Do not
use rechargeable batteries. The message "The device is ready for use.
You may start measuring." is displayed.
• Close the battery compartment lid again carefully.
• With inserted batteries, the unit permanently displays the time and date.
If the the low battery indicator
performed. The device will announce: "Battery weak." Please replace all batteries. Once the
batteries have been removed from the unit, the date, time and language must be set again.
Used batteries should not be disposed of in normal household waste. Dispose of them via your electronics
retailer or your local recycling point. You are legally obligated to do so.
Battery disposal
• The empty, completely flat batteries must be disposed of through specially designated collection boxes,
recycling points or electronics retailers. You are legally required to dispose of the batteries.
• The codes below are printed on batteries containing harmful substances:
Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury
3
10
9
8
7
and
appear, no further measurements can be
Information on the display:
11
4
10
5
6
9
8
1. Inflate
, release air
2. Systolic pressure
3. Memory display: average value (
morning (
4. Diastolic pressure
5. User memory
6. Calculated pulse value
7. Cardiac arrhythmia symbol
8. Time and date
9. Classification of measurements
10. Memory space number
11. Battery replacement symbol
5
1
2
3
4
5
6
7
), evening (
)
4 x AA (LR6) 1,5 V
),
Publicidad
Tabla de contenido
