Pairing Additional Cameras - Lorex Baby SWEET PEEP Guia Del Usuario

Pairing Additional Cameras

The camera(s) included have already
been paired with the monitor. If you have
purchased additional add-on cameras (model#
BB2281AC1 and BB2415AC1), OR if your
monitor and camera are not paired up, follow the
steps below.
NOTE: The monitor can support up to 4
cameras. For information on add-on cameras,
visit www.lorexbaby.com.
To pair a camera to your monitor:
Place the camera and monitor next to each
1
other. Make sure the camera is turned on.
2
Press and hold for 5
seconds until
shown to enter pairing
mode
Press
3
would like to pair the camera to.
If a camera is already connected to
this channel, the new camera will
replace the existing camera.
is
to select the channel you
16
C1 
LINK