Maintenance; Fuses - ACD GRUPPE MAX STD 300 Manual De Instrucciones

6 Maintenance


Check the rollers and the brakes every year.

The two batteries installed in the Mobile Workstation MAX are maintenance-free AGM block
batteries.
Use original spare parts only.

6.1 Fuses

In order to change a fuse, switch off the Mobile Workstation MAX using the On/Off
switch, open the battery module, disconnect the charger connection cable and
unplug the battery tray connection cable.
If a DC/AC converter is installed, voltages of up to 1,000 V can occur.
The fuses are located behind the removable rear panel, you can find the fuse type in the technical data.
Figure 19: Fuses box
When changing a fuse, use only the same type of fuse!
MAX_300_750_1500_OWR_Operating_Manual_Manual_de_Instrucciones_UL_V1.02_en_es
Figure 20: Battery fuse
13 / 45