Electronic Devices On Mobile Workstation Max Std 300/750/1500 Us - ACD GRUPPE MAX STD 300 Manual De Instrucciones

4.1 Electronic Devices on Mobile Workstation
MAX STD 300/750/1500 US
Electrical work is only to be performed by certified electricians!
You can use the Mobile Workstation MAX STD 300/750/1500 US to connect electronical devices to a secure
24 V DC or 120 V AC power source.
The 24 V DC power is provided via a plug on the rear of the electronics box.
Figure 8: Green plug
The 120 V AC power is provided via a socket strip on the left side of the Mobile Workstation MAX STD
300/750/1500 US.
Figure 9: Socket strip
Ensure correct polarity!
Do not exceed maximum electrical load!
To operate 24 V DC devices on the Mobile Workstation MAX STD 300/750/1500 US, place them on the
Mobile Workstation MAX STD 300/750/1500 US and connect their leads to the green plug on the back.
Always ensure the correct polarity, as indicated on the plug.
To operate 120 V AC devices on the Mobile Workstation MAX STD 300/750/1500 US, place them on the
Mobile Workstation MAX STD 300/750/1500 US and plug their connectors into the socket strip.
MAX_300_750_1500_OWR_Operating_Manual_Manual_de_Instrucciones_UL_V1.02_en_es 7 / 45