Electronic Devices On Mobile Workstation Max Owr Us; Monitor Support Vesa 75/100 Socket (Optional) - ACD GRUPPE MAX STD 300 Manual De Instrucciones

4.2 Electronic Devices on Mobile Workstation MAX OWR US

Electrical Work may be carried out by certified electricians only!
You can use the Mobile Workstation MAX OWR US to connect electronic devices to a secure 24 V DC
power source.
The 24 V DC power is provided via a plug on the rear of the electronics box.
Figure 10: Green plug
Ensure correct polarity!
Do not exceed maximum electrical load!
To operate 24 V DC devices on the Mobile Workstation MAX OWR US, place them on the Mobile
Workstation MAX OWR US and connect their leads to the green plug at the back. Always ensure the correct
polarity as indicated on the plug.

4.3 Monitor Support VESA 75/100 socket (optional)

If you have a monitor support as an optional accessory, you can mount a LCD/TFT monitor on it.
The Monitor Support is designed for attaching LCD/TFT monitors with "VESA 75/100 system" weighing up to
33 lb.
The Monitor Support may not be used for any other purposes.
Mount the LCD/TFT monitor to the VESA socket following the monitor mounting instructions of the relevant
monitor. Use the mounting materials supplied with the monitor. Adjust and fasten the support to prevent it
from falling when moving the Mobile Workstation MAX.
Figure 11: VESA 75/100 socket
MAX_300_750_1500_OWR_Operating_Manual_Manual_de_Instrucciones_UL_V1.02_en_es 8 / 45