General Warnings; Product Identification - AERMEC S300S Instrucciones Para La Instalación, El Uso Y El Mantenimiento

GENERAL WARNINGS

The buyer is responsible for installa-
tion costs. Any use not expressly indi-
cated in this manual is not permitted.
Consequently AERMEC will not assume
any responsibility for damage that may
occur due to failure to comply with these
instructions.
• The hydraulic safety group must
be installed corrected and must not
be tampered with. Preserve with care
the booklet for fur ther consultation;
ESSENTIAL SAFETY RULES
We remind you that the use of products that
employ electrical energy and water requires
that a number of essential safety rules be fol-
lowed, including:
This appliance is not suitable for use by
persons (including children) with limited
physical, sensory, or mental capacities or
those lacking experience or knowledge,
unless they are supervised or instructed

PRODUCT IDENTIFICATION

The domestic hot water (D.H.W) can be
identified by:
- Packing label
that reports the identification data of the
product.
- Technical plate
at the bottom, together with the buffer
tank (inside the package)
NOTE
Tampering, removal, the lack of the identi-
fication plate or other does not allow the
safe identification of the product and will
make difficult any installation or maintenan-
ce operation to be performed.
16
By Aermec
• READ THIS DOCUMENT CAREFULLY,
the installation of the appliance must be
carried out by qualified and suitably pre-
pared personnel in compliance with the
national legislation effective in the country
of destination.
• Before performing any cleaning or main-
tenance operations, disconnect the applian-
ce from the power supply and /or through
the appropriate intercepting organs.
regarding the use of the appliance by a
person who is responsible for their sa-
fety. Children must always be supervised
to ensure they do not play with the stora-
ge tank .
It is prohibited to modify the safety or
adjustment devices without the manufactu-
rer's authorisation and precise instructions.
It is prohibited to jerk, detach, or twist
PACKING LABEL
• After removing the packing materials,
check the integrity of the content and
make sure that all parts of the packing
materials (brackets, plastic bags, foam
polystyrene etc.) are kept out of the reach
of children, as they are a potential source
of danger.
This appliance is in compliance with the
ef fective legislation of the European
Community Directives EEC.
possible electrical cables coming from
the unit.
It is prohibited to touch the appliance
when you are barefoot and with parts of
the body that are wet or damp.
It is prohibited to disperse or abandon
the packing materials, and they must be
kept out of the reach of children, as they
are a potential source of danger.
POSITIONING THE FEET
IN THE HOLE HOOD
S300S-S400S-S500S 10.01 5890940_03
TECHNICAL PLATE
Fig. 1