Installation Standards - AERMEC S300S Instrucciones Para La Instalación, El Uso Y El Mantenimiento

INSTALLATION STANDARDS

• INSTALLATION
This appliance is destined for heating
domestic hot water to a temperature
below boiling at atmospheric pressure
and must be connected to a heating
system and a domestic hot water distri-
bution system, compatible to its perfor-
mance and power.
• LEVELLING
Use the adjustable feet situated at the
base of the boiler to level the storage tank:
- from BP/BC 150 to BP/BC 300:
3 adjustable feet
- from BP/BC 400 to BP/BC 500:
4 adjustable feet
• Adjustable feet
By Aermec
The place of installation must be protec-
ted from frost. The storage tank heat
exchanger must be positioned near to
the heat generator. In this way, useless
heat dispersions are avoided. If this is not
possible, insulate well the feeding tubes.
Its position must allow the laying of both
the domestic hot water conduct and that
for the heating water.
Four adjustable feet are provided and
are to be screwed in to the appropriate
threaded slots, situated at the bottom of
the appliance.
S300S-S400S-S500S 10.01 5890940_03 17