Declarations Of Conformity - Sartorius EC1XS Serie Manual De Instalación Y Seguridad

Declarations of Conformity

The C marking may be affixed to equipment that complies
with the following Directives:
Council Directive 89/336/EEC "Electromagnetic compatibility
(EMC)" Applicable European Standards:
1.1 Reference to 89/336/EEC: Official Journal of the European
Communities, No. 2001/C105/03
EN 61326-1 Electrical equipment for measurement,
control and laboratory use
EMC requirements
Part 1: General requirements
Defined immunity Industrial areas, continuous un-monitored
operation to (see Installation Instructions)
interference:
Limitation of Residential areas,
emissions: EC1XS.-......-L Class B
Note:
The operator shall be responsible for any modifications to Sartorius
equipment and for any connections of cables or equipment not
supplied by Sartorius. On request, Sartorius will provide information
on the minimum operating specifications (in accordance with the
Standards listed above).
10
Council Directive 73/23/EEC "Electrical equipment designed
for use within certain voltage limits"
Applicable European Standards:
EEN 60950 Safety of information technology
equipment including electrical business
equipment
EN 61010 Safety requirements for electrical
equipment for measurement, control
and laboratory use
Part 1: General requirements
94/9/EC "Equipment and protective systems intended for
use in potentially explosive atmospheres"
Applicable European Standards:
EN 50014 General requirements
EN 50020 Intrinsic safety
If you use electrical equipment in installations and under ambient
conditions requiring higher safety standards, you must comply
with the provisions as specified in the applicable regulations for
installation in your country.