Led Indicator Guide - Schlage GWE Manual De Instrucciones

Status LED
Solid amber
Long flash amber, repeating
Fast flash x2, repeating for 1 minute
Fast flash x3, repeating for 1 minute
Solid blue
Long flashing blue
Fast flash blue, repeating
Alternating long flashing blue and red
Solid red
Fast flash red x4
Alternating green and red long
flashes, repeat
Solid green
Fast flash green x2
Fast flash green x3
Status LED

LED Indicator Guide

Meaning
Gateway is booting up
Gateway Wi-Fi access point is active
Factory default reset did not complete
successfully
Power on self test failure
Gateway is commissioned, normal
operation
Mobile application is connected to
Gateway
Gateway is in link mode - connected
and linking to new lock
Gateway is in link mode - searching
for new lock
Factory Default State /
Uncommissioned
Linking to lock was not a success
Gateway is updating its firmware
Gateway is in process of reseting to
default settings
Gateway will begin a factory default
reset
Linking to lock was a success
FW upgrade succeeded
Type of LED User
Interface
State
State
Status code
Status code
State
State
State
State
State
Status code
State
State
Response to user
action
Status code
Data Send/
Receive LEDs
13