FAAC 413 Manual De Instrucciones página 8

Page  413
Guide for the installer
IMPORTANT NOTES FOR INSTALLER
1. DESCRIPTION (Fig. 1)
2. TECHNICAL SPECIFICATIONS
2.1. Versions
3. INSTALLATION
3.1. Electrical set-up (standard system Fig. 3)
3.2. Preliminary checks
3.3. Installation dimensions
3.4. Installing the operators
3.5. Wiring the operator
4.6. Mechanical travel stops
3.7. Limit switches
3.8. Start-up
4. TESTING THE AUTOMATED SYSTEM
5. MANUAL OPERATION
5.1. Restoring normal operation
6. MAINTENANCE
7. REPAIRS
8. AVAILABLE ACCESSORIES
9. SPECIAL APPLICATIONS
Manufacturer: FAAC S.p.A.
Address: Via Calari, 10 - 40069 - Zola Predosa - Bologna - ITALY
Declares that: Operator mod. 413
• is built to be integrated into a machine or to be assembled with other machinery to create a machine under the provisions of Directive
2006/42/EEC;
• conforms to the essential safety requirements of the following EEC directives:
• 2006/95/EC Low Voltage directive.
• 2004/108/EC Electromagnetic Compatibility directive.
• and also declares that it is prohibited to put into service the machinery until the machine in which it will be integrated or of which it will
become a component has been identified and declared as conforming to the conditions of Directive 2006/42/EEC and subsequent
modifications.
Bologna, September 20, 2010
Read this installation manual to the full before you begin installing the product.
The symbol indicates notes that are important for the safety of persons and for the good condition of the automated system.
The symbol
CE DECLARATION OF CONFORMITY
Notes on reading the instruction
draws your attention to the notes on the characteristics and operation of the product.
INDEX
Managing Director Managing Director
A. Marcellan A. Marcellan
page.7
page.7
page.7
page.7
page.7
page.7
page.7
page.8
page.8
page.8
page.8
page.9
page.9
page.9
page.9
page.9
page.9
page.9
page.9
page.9