Topcom SOLOGIC B901 COMBO Guia Del Usuario página 35

OK
4 5 6
G J
M
K
H N
I L O
Important Handsets can only be de-registered when they are
6.4 Selecting a base station
If your handset is registered to more than one base station (max. 4),
you must select one of these base stations since the handset only
communicates with one base station at a time. There are two options:
Auto Select
If you set the handset to 'Auto Select', the handset will
automatically search for the nearest base station in standby mode.
OK
OK
OK
OK
Info
Manual Select
If you set the handset to 'Manual Select', the handset will only
search for the base station you have set.
OK
OK
OK
OK
OK
4 Enter the internal number of the handset you want to
de-register (1-5) and confirm.
Once the handset has been successfully de-
registered, it reverts to standby mode. Otherwise you
will be asked to enter the handset number again.
not in use.
Press the Menu / OK key.
1
2 Select "HANDSET" and confirm.
3 Select "SELECT BASE" and confirm.
4 Select "AUTOMATIC" and confirm.
If you allow the base station to be selected
automatically and the handset goes out of range of
the current base station, the handset will only
search for the strongest base station in standby
mode (not during a call).
1 Press the Menu / OK key.
2 Select "HANDSET" and confirm.
3 Select "SELECT BASE" and confirm.
4 Select "MANUAL" and confirm.
5 Select the base station and confirm.
Registering and de-registering a handset
33