Stereo/Mono Selection (Transmitter Only); Activating/Deactivating The Lock Mode; Exiting The Operating Menu - Sennheiser SR 300 IEM G2 Manual De Instrucciones

Mode
LOCK
Lock
SR 300 IEM G2/SR 350 IEM G2
EK 300 IEM G2
EXIT
Exit

Stereo/mono selection (transmitter only)

Via the "Mode" menu, you can switch the transmitter between mono and
stereo operation.
Note:
Connect any unit that only delivers a mono signal to the transmitter's left
XLR-3F socket and set the transmitter to mono operation. The receiver
automatically "identifies" the transmitted audio signal and does not need
to be set to mono operation. However, you have to deactivate the pilot
tone evaluation on the receiver.

Activating/deactivating the lock mode

Via the "Lock" menu, you can activate or deactivate the lock mode.
The lock mode icon on the display indicates that the lock mode is activated.
To deactivate the lock mode, first press the
rocker button to select "LOC.OFF". If you confirm your selection by pressing
the SET button, the buttons can be operated as usual.

Exiting the operating menu

Via the "Exit" menu, you can exit the operating menu and return to the
standard display.
SET button. Then press the /
33