Connections/Installation; Part Names And Functions - Denon DN-S5000 Instrucciones De Operación

2

CONNECTIONS/INSTALLATION

1. Turn off the POWER switch.
2. Connect the RCA pin cords between the DN-S5000 outputs and inputs of your mixer. Be sure MAIN OUTs are
Main outputs and ALPHA OUTs are outputs of Alpha-Track sound.
3. If your mixer has Fader Start function such as our DENON DN-X800 or DN-X400, connect FADER 1, 2 jacks to
the mixer using 3.5 mm stereo mini cord.
4. If you have a DENON DN-X800 mixer, you can use the X-Effect function to control the Hot Starts, Samplers
and Brake from the crossfader to get wide variety of operation. You may also trigger the Alpha Track by
connecting Fader Start 1, 2 to the DN-X800 mixer using the 3.5 mm stereo mini cords.
Fig. 1 : Fader start connections example 1
FADE FADE
CH1 CH2 CH3 CH4 Rch1 Rch2
DN-X400
FADER FADER
MAIN ALPHA MAIN ALPHA
3.5 mm stereo mini cord
DN-S5000
X'EFFECT X'EFFECT
IN OUT
• Fader start playback is possible with the Main and
Alpha-Tracks.
Fader start connections example 2
FADE FADE
CH1 CH2 CH3 CH4 Rch1 Rch2
DN-X400
FADER FADER FADER FADER
MAIN ALPHA MAIN ALPHA MAIN ALPHA MAIN ALPHA
DN-S5000 DN-S5000
CD1 CD2
X'EFFECT X'EFFECT X'EFFECT X'EFFECT
IN OUT IN OUT
• Fader start playback is possible with the CD 1 Main
Track and CD 2 Main Track.
• The memos of CD1 and CD2 can be compared
when the CD players are connected by X-EFFECT.
• Relay play
Fig. 2 : X-Effect connections example 1
FADE FADE
CH1 CH2 CH3 CH4 Rch3 Rch4 X'EFFECT
DN-X800
FADER FADER
MAIN ALPHA MAIN ALPHA
RCA cord
DN-S5000
X'EFFECT X'EFFECT
IN OUT
• X-EFFECT playback is possible with the Main and
Alpha-Tracks.
X-Effect connections example 2
FADE FADE
CH1 CH2 CH3 CH4 Rch3 Rch4 X'EFFECT
DN-X800
FADER FADER FADER FADER
MAIN ALPHA MAIN ALPHA MAIN ALPHA MAIN ALPHA
DN-S5000 DN-S5000
CD1 CD2
X'EFFECT X'EFFECT X'EFFECT X'EFFECT
IN OUT IN OUT
• X-EFFECT playback is possible with the CD 1 Main
Track and CD 2 Main Track.
• The memos of CD1 and CD2 can be compared
when the CD players are connected by X-EFFECT.
• Fader start playback is possible with the Alpha-
Tracks of CD1 and CD2.
• Relay play
3

PART NAMES AND FUNCTIONS

(1) Front panel
q
Disc loading slot
• Load the CD. Load the disc slowly, and release
it once the DN-S5000 starts drawing the disc
in.
CAUTIONS:
• Do not load discs when the power is turned
off.
• Do not try to forcibly remove a disc once
the DN-S5000 has started to draw it in.
• Do not load more than once disc at a time
or insert anything other than discs.
Otherwise loading mechanism may be
damaged.
w
CD drive
• This Drive is field replaceable by you.
• Optional spare drive is sold separately.
ENGLISH
(2) Rear panel
e POWER button (¢ON £OFF)
• Push this button to turn power on and off.
CAUTION:
• Do not turn off the power while a disc is
loading or being ejected. Otherwise loading
mechanism may be damaged.
r X-EFFECT jacks
(X-EFFECT IN/OUT)
• Connect this jack to the DENON mixer DN-
X800 and DN-S5000 with 3.5 mm stereo mini
cord.
t
Alpha analog output jacks
(LINE OUT ALPHA)
• These are unbalanced RCA output jacks.
• Alpha-Track audio signals are output.
y
Main analog output jacks
(LINE OUT MAIN)
• These are unbalanced RCA output jacks.
• Main audio signals outputs.
u
Fader start jacks
(FADER MAIN, ALPHA)
• Use these when your mixer has Fader Start
function with 3.5 mm stereo mini cord.
i
Digital output jacks
(DIGITAL OUT MAIN, ALPHA)
• Main/Alpha Digital data is output from these
jacks.
• Use 75 Ω/ohms pin cord for connections.
• We recommend you use braided wire type
shielded cables.
7