Using The Kit In Systems With A Main Entrance; Programming Buttons On Art. 4680Kc - Comelit 8185I Manual Tecnico

Using the kit in systems with a main entrance

The diagrams BK/EN/109IC and BK/EN/110IC on page 88 and 90 show a
possible system configuration for managing up to a max. of 30 Bravo Kits
with one Art. 4680C - Art. 4680KC* placed, for example, at the entrance
of a residential complex.
Using these system diagrams, it is possible to call one of the Bravo Kits
from the main entrance equipped with Art. 4680C - Art. 4680KC* .
In this configuration it is necessary to program the buttons of Art. 4680KC
on Art. 4879KC (as illustrated in the procedure below); the internal units
should also be programmed with the corresponding code (see table on
page 20).

Programming buttons on Art. 4680KC

-V
1
⇒
4
22 22
+V
2
5
For further information on the integration of Bravo Kits into Simplebus
systems and the programming of the main entrance (Art. 4680C - Art.
4680KC*), refer to the catalogue (no. 140) and the technical manual FT/
SBC/21.
* Operating restrictions for Art. 4680KC
Art. 4680KC manages calls originating from ONLY digital or button
modules if they fall between address 1 and address 10.
Set the user code using the dip
switches, see table on page 20
3
3
optional