Operation And Maintenance - Alcatel-Lucent 1675 Manual De Seguridad

............................................................................................................................................................................................................................................................

Operation and maintenance

Invisible laser radiation
1675 LambdaUnite MSS systems operate with invisible laser radiation. Laser radiation
can cause considerable injuries to the eyes.
Never look into the end of an exposed fiber or into an open optical connector as long as
the optical source is switched on. Always observe the laser warning instructions (please
refer to the section
Arcing
Depending on the type of power interface, observe the following hazard statements:
Arcing can cause burns to the hands and damage to the eyes.
Before removing or inserting the power supply plug at the Power Interface (PI/-), ensure
that the line circuit breaker on the Power Interface is in the "OFF" position.
Arcing can cause burns to the hands and damage to the eyes.
Before removing or connecting the power supply cable lugs at the Power Interface
(PI/100), ensure that the line circuit breaker on the Power Interface is in the "OFF"
position.
Arcing can cause burns to the hands and damage to the eyes.
Before removing or connecting the power supply cable lugs at the Power Interface
(PI/100NOCB), ensure that the power supply line is switched off at the upstream circuit
breaker in the BDFB (Battery Distribution and Fuse Bay) or PDP (Power Distribution
Panel).
............................................................................................................................................................................................................................................................
1 - 3 2
DANGER
Laser hazard
"Laser safety"
DANGER
Power Interface PI/-:
Arcing on removing or inserting a live power supply plug
DANGER
Power Interface PI/100:
Arcing on removing or connecting live power supply cable lugs
DANGER
Power Interface PI/100NOCB:
Arcing on removing or connecting live power supply cable lugs
(1-11)).
365-374-159R11.01.28 Release 11.01.28
Issue 1 November 2012
1675 LU MSS