Siemens CP 343-2 Manual De Instrucciones página 113

Tabla H-2 PICS, (continuación)
No. Función o llamada a interfaz host
(representación simbólica)
22.4 Status, Resp = Cmd_Read_Status(Addr,
STAT)
22.5 Status, Resp =
Cmd_Read_Reset_Status(Addr, STATRES)
22.6 Status, Resp =
Cmd_Read_Ext_ID−Code_1(Addr, IDCOD1)
22.7 Status, Resp =
Cmd_Read_Ext_ID−Code_2(Addr, IDCOD2)
23 Status, S_List = Get_LPF()
24 Status = Write_Extended_ID−Code_11
(S_Ext_ID−Code_1)
25 AImage, Status = Read_AIDI()
26 Status = Write_AODI(AImage)
27 String, Status = Read_ParamStr(S_Addr)
28 Status = Write_ParamStr(S_Addr, String)
29 String, Status = Read_DiagStr(S_Addr)
30 String, Status = Read_IdentStr(S_Addr)
Parte Perfiles de esclavo soportados
B
1 Support of extended address mode
2 Support of Combined transaction type 1
integrated (S−7.3 only)
3 Full support of Combined transaction type 1
integrated
4 Support of Combined transaction type 2
integrated
5 Support of Combined transaction type 3
integrated
6 Support of Combined transaction type 4
integrated
7 Support of Combined transaction type 5
integrated
CP 343−2 / CP 343−2 P AS−Interface Master
Edición 08/2008
C79000−G8978−C149−04
A AS−Interface Protocol Implementation Conformance Statement (PICS)
M4 Observación / realización de la función por
X ver el cap. 5.2
− Comando opcional
X ver el cap. 5.2
X ver el cap. 5.2
X ver el cap. 5.2
X ver el cap. 5.2
X no implementado
X no implementado
X no implementado
X no implementado
X no implementado
X no implementado
X
X
X Sólo se da soporte a los perfiles 7.3/7.4.
X
X
X
X
113