Unpacking; Disposal Of The Packaging - CASO DESIGN CR3X Acid Etched Manual Del Usuario

13.3 Unpacking

1
2
3
4
Warning
Personal and property damages can occur during commissioning of the device!
Observe the following safety notices to avoid such dangers:
► The drums have very sharp edges. To avoid injury when unpacking parts, please follow
these instructions.

13.4 Disposal of the packaging

The packaging protects the device against damages during transit. The packaging
materials are selected in accordance with environmentally compatible and recycling-
related points of view and can therefore be recycled.
Returning the packaging back to the material loop saves raw materials and reduces the
quantities of accumulated waste. Take any packaging materials that are no longer required
to "Green Dot" recycling collection points for disposal.
Please note
► If possible, keep the original packaging for the device for the duration of the guarantee
period of the device, in order that the device can be re-packaged properly in the event
of a guarantee claim.
caso CR3X Acid Etched
To unpack the device, proceed as follows:
•
Remove the device out of the carton and remove
the packaging material.
•
Place the box on a table or kitchen counter. Be
sure the box is right side up.
5
•
Remove the top cardboard insert (1). Then
6
remove the housing base (2).
•
The food chamber and pusher (3) are located in a
bag in one corner of the box. Remove these next.
•
The slicing drum is located inside the food
chamber (4). Remove it WITH GREAT CARE; THE
BLADES ARE VERY SHARP.
•
The other drums are located in the corner of the
box in separate bubble bags (5-6). Remove them one at
a time, WITH GREAT CARE; THE BLADES ARE VERY
SHARP.
29