Information Codes - Samsung WA52J8060A Serie Manual Del Usuario

Troubleshooting
Has odours.
• Excessive suds collect in recesses and can cause foul odours.
• Run cleansing cycles to sanitize periodically.
• Dry the washing machine interior after a cycle has finished.
If a problem persists, contact a local Samsung service center.
Information codes
The washer may display information codes to help you understand what is occurring with
_our washer better.
¸¸¸¸¸¸¸¸¸¸2: ::
i_ i _I _
i ¸
i i i
4 _
The WaterLevel sensor is not working properly.
• Check WaterLevel Sensor wire harness.
• If the information code remains, contact a customer service
centre.
1C
3C
4C .
NOTE
When the washer displays"lC", the washer do draining for 3
minutes. During this time, the Power button is inoperative.
Check the motor for operation.
• Try restarting the cycle.
• If the problem continues, call for service.
Water is not supplied.
• Make sure the water taps are open.
• Make sure the water hoses are not clogged.
• Make sure the water taps are not frozen.
• Make sure the washing machine is operating with sufficient
water pressure.
Make sure that the cold water tap and the hot water tap are
properly connected.
• Clean the mesh filter as it may be clogged.
NOTE
When the washer displays "4C", the washer do draining for 3
minutes. During this time, the Power button is inoperative.
56 English
WAS000J WA8700J "_\TA52J03133Y 01 ENindd 56 2015/4/20 15:33:55