Getting Started - Samsung WA52J8060A Serie Manual Del Usuario

Ocultar thumbs Ver también para WA52J8060A Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Getting started
1.
Load your washer.
2.
Add liquid (or powder) detergent
and additives
to the dispenser (see the "Detergent use"
section on page 39).
3.
Select the appropriate
cycle and options for the load (see the "Washing a load of laundry"
section page 30).
4.
Close the lid.
5.
Press Start/Pause.
6.
The Wash Indicator illuminates.
7.
The estimated cycle time will appear in the display.
The time may fluctuate to indicate the time remaining
in the cycle.
NOTE
The actual time required for a cycle may differ from the estimated time in the display
depending
on the water pressure, water temperature,
detergent, and laundry.
8.
Before your washer starts to fill, it will make a series of clicking noises to check the door
lock and do a quick drain.
NOTE
When the cycle is complete, the_
Door Lock indicator will go out and "End" will appear
in the display.
Pressing Power cancels the cycle and stops your washer.
The Wash, Rinse, and Spin indicators
will illuminate
during those portions of the cycle.
English
29
WAS000J WA8700J
"_\TA52J03133Y 01 EN indd 29
2015/4/20
15:33:47

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Wa52j8700a serie

Tabla de contenido