Faxing (Advanced); About Speed-Dial Codes, One-Touch Keys, And Group-Dial Codes 31; To Program Speed-Dial Codes And One-Touch Keys - HP LaserJet 3300 Serie Manual De Instrucciones

4
About speed-dial codes, one-touch keys, and group-dial
codes
Note
ENXC

Faxing (advanced)

This chapter will present a few of the advanced faxing features available
on your HP LaserJet 3330. For complete information on all fax features,
as well as information about all other product features, refer to the
electronic user guide that came on your product CD-ROM. For
instructions on accessing the electronic user guide see
electronic user guide" on page
You can store frequently dialed fax numbers or groups of fax numbers as
one-touch keys, speed-dial codes, or group-dial codes.
In the product's phone book, there are a total of 275 codes available that
can be used for speed-dial codes and group-dial codes. For example, if
you program 225 of the codes as speed-dials, the remaining 50 can be
used for group-dials.
See the following procedures for more information about how to use
speed-dial codes, one-touch keys, and group-dial codes:
To program speed-dial codes and one-touch
keys
Speed-dial codes 1 through 9 are also associated with their
corresponding one-touch keys on the control panel. The one-touch keys
can be used for speed-dial or group-dial codes. A maximum of 50
characters can be entered for a single fax number.
Speed-dial codes, one-touch keys, and group-dial codes are more easily
programmed from the software. For instructions on programming
speed-dial codes, one-touch keys, and group-dial codes using the product
software, see the electronic user guide.
Use the following steps to program speed-dial codes and one-touch
keys from the product's control panel:
1 Press menu/enter.
2 Use the < or > button to select Fax Setup and press menu/enter.

About speed-dial codes, one-touch keys, and group-dial codes 31

30.
"Accessing the