Checking The Installation; Compatibility - Leviton 41910-U2B Guia Del Usuario

INSTALLATION GUIDE

Checking the Installation

1. Check that the Power, Activity, Link and Host LEDs on the Transmitter and Receiver are ON. If the Host or Link LEDs
are OFF, then the cabling between the Transmitter and Receiver may not be installed properly or may be defective, see
Troubleshooting Section page 9.
2. For Windows users (XP, 7, 8, 8.1, 10), open Device Manager to confirm that the 41910-U2B extender system has been
installed correctly. Expand the entry for Universal Serial Bus controllers by clicking the "+" sign. If the extender system has
been installed correctly, you should find it listed as a "Generic USB Hub".
Note: To open Device Manager in Windows XP:
Right click "My Computer" then select: Properties >> Hardware tab >> Device Manager
Note: To open Device Manager in Windows 7:
Open the Start Menu, right click on "Computer" then select: Manage >> Device Manager
Note: To open Device Manager in Windows 8, 8.1 or 10:
Right click the Start Menu and then select: Device Manager
Programs and Features
Mobility Center
Power Options
Event Viewer
System
Device Manager
Network Connections
Disk Management
Computer Management
Command Prompt
Command Prompt (Admin)
Task Manager
Control Panel
File Explorer
Search
Run
Shut down or sign out
Desktop
3. For macOS ® users, open the System Profiler to confirm that the 41910-U2B Series extender system has installed correctly.
In the left-hand column under Hardware, select "USB" and inspect the right hand panel. If the extender has been installed
correctly, you should find it listed as a "Hub" under the USB High-Speed Bus/USB Bus.
Note: To open System Profiler in macOS
Open the Finder, select Applications, then open the Utilities folder and double click on the System Profiler icon.
4. If the 41910-U2B Series extender system is not detected correctly or fails to detect, please consult the Troubleshooting
section in this guide.

Compatibility

The 41910-U2B complies with all USB 1.1 and USB 2.0 specifications governing the design of USB devices. However, there
is no guarantee that all USB devices fully comply with the standard. If the extender link fails to connect, then refer to the
Troubleshooting Section page 9.
® :
7