Mounting Options; Mounting Brackets - Leviton 41910-U2B Guia Del Usuario

MOUNTING OPTIONS (optional)

1. Mounting Brackets

Using a Phillips screwdriver, secure the included brackets to the base of the Transmitter and Receiver using the
fasteners provided. Mount the Transmitter and Receiver either by fastening directly to the mounting surface
(fasteners not provided), or by using hook and loop fasteners through the bracket slots.
2. Cable Tie Mounting
The bottom of the 41910-U2B enclosure also features
four slots for cable tie mounting. Thread cable ties
(not provided) through the mounting slots to secure the
transmitter and receiver to a display mount or
other available structure.
3. Direct Surface Mounting
The bottom of the 41910-U2B enclosure includes four
tapped holes for direct surface mounting to a flat surface.
The sketch below provides mounting dimensions.
The tapped holes accept M2.5 hardware.
Mounting
hole (4)
8
Cable tie
mounting
slots (4)
ø
0.14"
(3.60 mm)
4 places
2.46"
(62.53 mm)
1.65"
(42.00 mm)