Britax Child Safety GROW WITH YOU Guia Del Usuario página 17

Britax Child Safety, Inc.
Harness Mode: Lap Belt
Before you begin:
• Check that your vehicle has a top tether anchor.
Britax recommends that the top tether be used at
all times when installing the child seat. Using the
top tether will improve the stability of your child seat
and reduce the risk of injury. Check your vehicle
owner's manual for tether anchor locations.
• Loosen the tether and place it over the child seat
back to keep it from becoming pinned between the
child seat and vehicle seat during installation.
• Adjust the child seat to desired position and place
forward facing on the vehicle seat.
1. Pull seat cover forward.
2. Pull the vehicle belt out
and route along the green
belt path.
NOTE: Verify that the strap
is not twisted.
3. Push the child seat firmly
into the vehicle seat while
removing all slack from
the lap part.
NOTE: Ensure that the vehicle belt is locked as directed
by your vehicle owner's manual.
NOTE: The child seat is secure when it cannot be
moved front-to-back or side-to-side more than 1 in
(2.5 cm) at the belt path. If the child seat is not secure,
repeat the installation procedure or use a different
seating location.
14