Britax Child Safety GROW WITH YOU Guia Del Usuario página 22

4. Place the child in the
child seat. Ensure the
child is positioned
upright in the child
seat and not slouching.
Their bottom must
touch the child seat,
and their back must
rest flat against the
back of the child seat.
5. Position the harness
straps around the child
(See page 22).
6. Fasten the harness
buckle. Proper
connection is confirmed
with a click after
inserting each buckle
tongue.
7. Pull the harness
adjuster strap to
tighten the harness.
NOTE: The harness
should have a snug
fit around the child. A
snug strap should not
allow any slack. It lies
in a relatively straight
line without sagging. It
does not press on the
child's flesh or push
the child's body into an
unnatural position. You
should not be able to
pinch excess webbing.
8. Fasten the chest clip
and place the chest
pads in any position
that is comfortable for the child within the range of the
correctly placed chest clip.
NOTE: The correct height for the chest clip is at the
middle of the chest at armpit level.
Before traveling, verify that the:
Harness straps are not twisted.
Harness is snug.
Buckle is fastened.
Chest clip is at the child's armpit level.
GROW WITH YOU User Guide
Pull the harness adjuster
away from the child seat
(parallel to the ground) to
tighten.
Do not pull sideways.
CHECK LIST
19