For KX-UT113/KX-UT123:
Clamp
AC adaptor
CAUTION
Optional AC Adaptor
•
Use a Panasonic AC adaptor KX-A239CE (PQLV206CE).
•
The AC adaptor is used as the main disconnect device. Ensure that
the AC outlet is installed near the unit and is easily accessible.
When connecting a headset
•
Ensure that the headset cord has slack and is not pulled tight during
use to prevent damage to the connectors.
•
Cords used to connect devices to the EHS jack or headset jack must
be less than 3 m in length.
Notice
•
The following headsets can be used with this unit. (Not all
operations with the headsets can be guaranteed.)
–
–
For up-to-date information about headsets that have been tested
with this unit, refer to the following web sites:
https://panasonic.net/cns/pcc/support/sipphone/
Handset
Wired headsets
Panasonic RP-TCA400 and RP-TCA430
EHS headsets (KX-UT133/KX-UT136 only)
Selected Plantronics
Optional AC adaptor
To a switching hub
To a PC (KX-UT123 only)
Ethernet cables
-brand headsets
®
Connections
To a handset jack
(handset)
Headset
19