Self-Diagnosis Function; Displaying This Monitor's Information - Sony SDM-P232W Guía De Instalación Rápida

Self-diagnosis function

This monitor is equipped with a self-diagnosis function. If there is
a problem with your monitor or computer(s), the screen will go
blank and the 1 (power) indicator will light up in green.
If the function tells you the monitor may have a potential failure,
consult your authorized Sony dealer.
If the picture disappears from the screen and the
1 (power) indicator is green
1
Turn off the 1 (power) switch and disconnect the
video signal cables from the monitor.
2
Turn the monitor on by pressing the 1 (power)
switch.
If all four color bars appear (white, red, green, blue), the monitor
is working properly. Reconnect the video input cables and check
the condition of your computer(s).
If the color bars do not appear, there is a potential monitor failure.
Displaying this monitor's
information
While the monitor is receiving a video signal, press and
hold the MENU button for more than 5 seconds until the
information box appears.
Press the MENU button again to make the box disappear.
Example
MENU
INFORMATION
Model : SONY SDM-P232W
Ser. No. : 1234567
Manufactured : 2002-40
If any problem persists, call your authorized Sony dealer and give
the following information:
• Model name: SDM-P232W
• Serial number
• Detailed description of the problem
• Date of purchase
• Name and specifications of your computer and graphics board
• Type of input signals (analog RGB/digital RGB)
Model
1: HD15
name
Serial
number
Week and year
of manufacture
Specifications
LCD panel Panel type: a-Si TFT Active Matrix
Picture size: 23.0 inch
Input signal format RGB operating frequency*
Horizontal:
Vertical:
Resolution Horizontal: Max.1920 dots
Vertical: Max.1200 lines
Input signal levels Analog RGB video signal:
SYNC signal:
Digital RGB (DVI) signal:
Power requirements 100–240 V, 50–60 Hz,
Max. 1.0 A
Power consumption Max. 80 W
Operating temperature 5–35
Dimensions (width/height/depth)
Display (upright):
Mass Approx. 12.7 kg (27 lb. 16 oz.)
(with stand)
Approx. 10.2 kg (22 lb. 8 oz.)
(without stand)
Plug & Play DDC2B
Included items See "Setup."
* Recommended horizontal and vertical timing condition
• Horizontal sync width duty should be more than 4.8% of total
horizontal time or 0.8 µs, whichever is larger.
• Horizontal blanking width should be more than 2.5 µs.
• Vertical blanking width should be more than 450 µs.
Design and specifications are subject to change without notice.
28–92 kHz (analog RGB)
28–75 kHz (digital RGB)
48–85 Hz (analog RGB)
60 Hz (digital RGB)
0.7 Vp-p, 75 Ω, positive
TTL level, 2.2 kΩ,
positive or negative
(Separate horizontal and vertical,
or composite sync)
0.3 Vp-p, 75 Ω, negative
(Sync on green)
TMDS (Single link)
C
°
Approx. 566 × 446 × 251 mm
× 17 × 10 inches)
3 5
(22 / /
8 8
(with stand)
Approx. 566 × 380 × 114 mm
3 × 15 × 4 1
(22 / / inches)
8 2
(without stand)
5
(US)
US