Sony Handycam DCR-PJ6 Guía De Operaciónes página 46

Note on the camcorder/battery pack
temperature
When the temperature of the camcorder

or battery pack becomes extremely high or
extremely low, you may not be able to record
or play back on the camcorder, due to the
protection features of the camcorder being
activated in such situations. In this case, an
indicator appears on the LCD screen.
When the camcorder is connected to a
computer or accessories
Do not try to format the recording media of the

camcorder using a computer. If you do so, your
camcorder may not operate correctly.
When connecting your camcorder to another

device with a cable, be sure to insert the
connector plug in the correct way. Pushing the
plug forcibly into the terminal will damage the
terminal and may result in a malfunction of
your camcorder.
If you cannot record/play back images,
perform [MEDIA FORMAT]
If you repeat recording/deleting images for

a long time, fragmentation of data occurs on
the recording media. Images cannot be saved
or recorded. In such a case, save your images
on some type of external media first, and then
perform [MEDIA FORMAT] by selecting
 [Show others]  [MEDIA FORMAT]
[MANAGE MEDIA] category) 
(under
[YES]  [YES] 
Notes on use
Do not do any of the following, otherwise, the

recording media may be damaged, recorded
images may be impossible to play back or may
be lost, or other malfunctions could occur.
Eject the memory card when the access lamp

(p. 10) is lit or flashing
Remove the battery pack or AC Adaptor from

the camcorder, or subject the camcorder to
shock or vibration when the POWER lamp
(p. 10) or the access lamp (p. 10) are lit or
flashing
US

.