Sylvania LD200SL9 Manual Del Proprietário página 35

Adjust t he blacklevelto makethedarkareasof theTVpicturebrighter.
1
During playback, press [MODE] repeatedly until
"_" appears.
2 Use [Cursor A/V] to adjust the black level.
Youcanenjoyvirtual surround onyourexisting 2 channel s tereosystem.
During playback, press [MODE] repeatedly until
.... appears.
Use [Cursor A/V] to select the sound level.
i_iiiiill
or
ON : Makes the dark areas brighter.
OFF : Shows the original picture as recorded.
3 Press [RETURN] to exit.
Note:
• Thesettinq will be kept even if the unit is turned off..
Thisunitallowsyoutoselecta soundmodeduringaudioCDplayback.
During playback, press [AUDIO] repeatedly until the
desired sound mode appears.
AUDIO J
• Each time you press [AUDIO], the sound mode
changes as example below.
_ STEREO (stereo sound with left and right channels)
L-ch (left channel sound only)
R-ch (right channel sound only)
Note: ]
• Virtual surround cannot be changed when the sound mode is
set to either "L-oh"or "R-oh"
or
1 : Natural effect
2 : Emphasized effect
OFF : No effects (original sound)
Press [RETURN] to exit.
Note:
• The setting will be kept even if the unit is turned off.
• For audio CD, virtual surround wifl not be effective if the
sound mode is set to something other than "STEREO':
See"Stereo Sound Mode"
• Turn down the level or select "OFF" if the sound is distorted.
i?_il
iii!!:!;!
i!Z!
EN