Language Selection - Sylvania LD200SL9 Manual Del Proprietário

[] Language Selection
You can choose English, Spanish, or French asyour on-screen language,
Note:
• If you connect the cable system directly, contact the CATV
installer.
• If you press [POWER] or [SETUP] during auto channel scan,
the setting will be canceled.
• When no channel can be received by auto channel scan,
"NO TV SIGNALS" will be displayed on the TV screen.
• Channel settings will be saved even if the power fails.
• If you have Spanish or French menus and need English,
press [SETUP]. Use [Cursor Air] to select "IDIOMA"
or "LANGAGE'[ Press [ENTER] to select "ENGLISH" Press
[SETUP] to remove the main menu.
• With regard only to the digital channel, even after the
scanning is complete if you unplug the AC power cord
before turning off the unit by pressing [POWER], the
channel setting may be lost.
Press [SETUP] to display the main menu.
2 Use [Cursor AIr] to select"LANGUAGE", then press
[ENTER] repeatedly to change the setting.
or
e.g.) digital TV mode
- TVSETUP -
CHANNEL SETUP
V-CHIP SETUP
LANGUAGE [ENGLISH]
CAPTION [OFF]
BACK LIGHT [BRIGHT]
COLOR TEMF_ [NORMAL]
DTVCC
NGUSH]
SPAI_IOL]
RAN(_.AB]
3 Press [SETUP] to exit.
EN