Setting The Aux+ Name Mode; Setting The Aux Mode (V-Link); Setting The Changer Name; Setting The External Digital Input (Digital Aux) - Alpine iDA-X200 Manual De Operación

Setting the AUX+ NAME Mode

AUX (Initial setting) / TV / DVD / PORTABLE / GAME
You can change the AUX+ NAME when AUX+ is ON.

Setting the AUX Mode (V-Link)

AUX ON / AUX OFF (Initial setting)
You can input TV/video sound by connecting an optional Ai-NET/RCA
Interface cable (KCA-121B) or Versatile Link Terminal (KCA-410C) to
this component.
You can change the AUX NAME display when AUX is set to ON. Press
/ENTER when AUX is set to ON, and select AUX NAME by
turning the Double Action encoder (iDA-X200 only) or Rotary
encoder (iDA-X300 only) , then press
After that, turn the Double Action encoder (iDA-X200 only) or Rotary
encoder (iDA-X300 only) to select the desired AUX name.
If the KCA-410C is connected, it is possible to select two AUX names.
• Via KCA-410C, up to 2 external devices with RCA output can be
connected. In this case, press
then press BAND to select your desired device.

Setting the Changer Name

CHANGER (Initial setting) / PORTABLE
When an optional changer is connected, you can set the displayed mode
name.
• The setting can be made only when a changer is connected. When
two changers are connected, the CHANGER1 NAME/CHANGER2
NAME is displayed, and the setting can be made respectively.

Setting the External Digital Input (DIGITAL AUX)

DIGITAL AUX ON / DIGITAL AUX OFF (Initial setting)
When an ALPINE Ai-NET compatible digital audio processor
(PXA-H701) and a DVD player (DVE-5207) not compatible with
Ai-NET are connected, set DIGITAL AUX to ON to enjoy 5.1-channel
surround sound.
You can change the D-AUX Name when DIGITAL AUX is set to ON.
Press /ENTER when DIGITAL AUX is set to ON, and select
D-AUX NAME by turning Double Action encoder (iDA-X200 only)
or Rotary encoder (iDA-X300 only), then press
• Press SOURCE , and select the D-AUX mode, and adjust the
volume, etc.
• After input selection is completed, turn the ignition off and back on
again. Setting of the optical digital input switch is completed.
• Depending on the connected audio processor, DVD player sound
may continue to be output, even though the source is changed to
another one. If this occurs, set the DVD player's power to OFF.

Setting the AUX+ Level (AUX IN GAIN)

LOW (Initial setting) / HI
After setting to ON in "Setting the AUX+ Mode", this setting can be
carried out.
LOW: Decreases the external input audio level.
HI: Increases the external input audio level.

Connecting to an External Amplifier (POWER IC)

ON (Initial setting) / OFF
When an external amplifier is connected, sound quality can be improved
by stopping the power supply of the built-in amplifier.
POWER IC OFF : Use this mode when the front pre-amplifier of the
unit is used to drive an external amplifier
connected to the speakers. In this setting, the
head unit's internal amplifier has no output to
drive speakers.
24
-EN
/ENTER.
SOURCE to select AUX mode and
/ENTER.
iDA-X200 :
iDA-X300 :
POWER IC ON : The speakers are driven by the built-in amplifier.
SPEAKER
RIGHT FRONT
SPEAKER
RIGHT REAR
SPEAKER
LEFT REAR
SPEAKER
LEFT FRONT
• No sound is produced by the system when the power output is set to
OFF.

Demonstration

DEMO ON / DEMO OFF (Initial setting)
This unit has a Demonstration feature for the display.
• To quit Demo mode, set to DEMO OFF.

Display Setting

DISPLAY is selected on the setup main menu in step 2.

Dimmer Control

MANUAL / AUTO (Initial setting)
Set the Dimmer control to AUTO to decrease the illumination
brightness of the unit with the head lights of the vehicle ON. This mode
is useful if you feel the unit's backlighting is too bright at night.

Scroll Type Setting

TYPE1 / TYPE2 (Initial setting)
Choose from two scrolling methods.
Select the type you prefer.
TYPE1: The characters scroll from right to left, a single
character at a time.
TYPE2: Words are built up from left to right, a single character
at a time. When the display is filled, it is cleared and
the remaining words are displayed the same way until
all words of the title have been shown.
Front
left
Amplifier
Front
right
Rear
left
Amplifier
Rear
right
Front
left
Amplifier
Front
right
Speakers
Front
right
Rear
right
Rear
left
Front
left