Samsung LN S4692D Manual De Instrucciones página 40

Setting up the TV with your PC
How to Auto Adjust
Use the Auto Adjust function to have the TV set automatically adjust the video signals the monitor receives.
The lunction also autonmtically fine4unes the settings and adjusts the frequency values and positions.
:_- This lunction does not work in DVl-Digital mode.
1, Press the MENU button to display the menu.
Press the * or - buttons to select "Setup", then press the ENTER_ button.
Press the A or - buttons to select "PC", then press the ENTER_ button.
:_ Changeto the PC modefirst.
2, Press the A or ,- buttons to select "Auto Adjustment', then press the ENTER_ button.
Press the EXIT button to exit.
Adjusting the Screen Quality
The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone,
then do the frequency adjustments to the utmost and fine tune again. After the noise has been ]'educed, re adjust the pictm'e so that
it is aligned on the center of the screen.
t. Press the MENU button to display the menu.
Press the .,- or v buttons to select "Setup", then press the ENTER_ button.
Press the _ or .-. buttons to select "PC", then press the ENTER_ button.
_- Changeto the PC modefirst.
2. Press the ENTER_ button to select "Image Lock".
Press the .,- or v buttons to select "Coarse" or "Fine", then press the ENTER_ button.
Press the 4 or ). buttons to adjust the screen quality.
Vertical stripes may appear or the picture may be blurry.
Press the ENTER_ button.
Press the EXIT button to exit.
English-38