HP PHOTOSMART PREMIUM C310 Serie Manual De Instrucciones página 6

Network Printer Setup
Changing from USB to wireless network connection
If you initially set up your printer using a USB connection to your computer, you can switch the
connection to a wireless network connection by following these steps.
USB
to
To change from USB to wireless connection:
Wireless
1. Click Start, click HP, click Photosmart C310
2. Follow the instructions on the displayed
If your printer
Troubleshooting for a wireless printer setup
is not found
Check that your printer is connected to your network.
during software
Run a Wireless Network Test to check that your printer is on the network. To do this:
installation...
1. On the HP Photosmart front panel, press the Wireless button to display the Wireless menu
2. Select Run Wireless Network Test on the display.
3. The Wireless Network Test Report is automatically printed.
If your printer is not connected to the network:
1. Press the Wireless button on the Printer Display to open the Wireless menu. Select
2. Follow the instructions on the screen.
For additional help with setting up a wireless connection, go to the Wireless Printing Center
site: www.hp.com/go/wirelessprinting.
Windows
series, then click USB to Wireless. Keep
your USB cable connected until prompted
to disconnect it.
screens.
• Click Next to move from one screen to
the next.
• Click Help to get additional information
about what is required on that screen.
on the printer display.
• Check the top of the report to see if anything failed during the test.
• See the Diagnostic Summary of all tests performed, and whether or not your printer
passed.
• View the Configuration Summary to identify the Network Name (SSID), Hardware
Address (Mac), and IP address.
Wireless Setup Wizard.
Mac
To change from USB to wireless connection:
1. On the HP Photosmart front panel,
press the Wireless button to display the
Wireless menu on the printer display.
2. Select Wireless Settings, then Wireless
Setup Wizard on the display.
3. Follow the steps in the Wireless Setup
Wizard to connect the printer.
4. To add the printer, go to System
Preferences, select Print & Fax, then
click the + button under the Printers list
at the left. Select your printer from the
list.
6