Tabla De Contenido; Setup - Sony CPD-E110 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

D:\WINNT-E\Profiles\Y3_Yano-w\Desktop\Print for
PDF\4084273111CPDE110UC\4084273111CPDE110UC\US\01US03BAS-UC.fm
01US01COV-UC.book Page 3 Thursday, April 12, 2001 12:00 PM
Table of Contents
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i
Preset mode timing table . . . . . . . . . . . . . . . . . . . . . i

Setup

1
Connecting your monitor to your computer
Video signal cable
of the monitor
Connecting to a Macintosh or compatible
computer
When connecting this monitor to a Macintosh computer, use the
Macintosh adapter if necessary. Connect the Macintosh adapter to
the computer before connecting the cable.
2
Turning on the monitor and computer
1
Connect the power cord to the monitor and press the
1 (power) switch to turn on the monitor.
2
Turn on the computer.
No need for specific drivers
This monitor complies with the "DDC" Plug & Play standard and
automatically detects all the monitor's information. No specific driver
needs to be installed to the computer.
The first time you turn on your PC after connecting the monitor, the setup
Wizard may appear on the screen. In this case, follow the on-screen
instructions. The Plug & Play monitor is automatically selected so that you
can use this monitor.
Notes
• Do not touch the pins of the video signal cable connector.
• Check the alignment of the HD15 connector to prevent bending the pins
of the video signal cable connector.
• Trinitron
• Macintosh is a trademark licensed to Apple Computer, Inc., registered in
the U.S.A. and other countries.
• Windows
Corporation in the United States and other countries.
• IBM PC/AT and VGA are registered trademarks of IBM Corporation of
the U.S.A.
• VESA and DDC
Association.
E
NERGY
• All other product names mentioned herein may be the trademarks or
registered trademarks of their respective companies.
• Furthermore, "ä" and "â" are not mentioned in each case in this manual.
HD15 input connectors
Pin No.
1
2
3
to HD15 of the
connecting computer
4
5
6
7
8
* DDC (Display Data Channel) is a standard of VESA.
â
is a registered trademark of Sony Corporation.
â
and MS-DOS are registered trademarks of Microsoft
ä
are trademarks of the Video Electronics Standard
S
TAR is a U.S. registered mark.
1 2 3 4 5
6
7
11 12 13 14 15
Signal
Pin No.
Red
9
Green
10
Blue
11
ID (Ground)
12
DDC Ground*
13
Red Ground
14
Green Ground
15
Blue Ground
4-084-27311 (1)
masterpage:Toc.master
8
9
10
Signal
DDC + 5V*
Ground
ID (Ground)
Bi-Directional
Data (SDA)*
H. Sync
US
V. Sync
Data Clock
(SCL)*
3
CPD-E110

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido