Pentair SIATA SFE-EV PRO Manual De Instrucciones página 10

When the system is regenerating, the following information are shown on the display:
 In all cases the regeneration icon on the controller display is turned on:

When the controller is moving the valve from one position to another, it shows which cycle will be
performed: nC-- , where n represent the cycle number (from 1 to 5). Revolving bar is also displayed to
indicate that the motor is on.

When a regeneration cycle has started but not finished, it shows what is the current regeneration
cycle step as well as the remaining time in minutes for that cycle: nCxx
If Modular option is activated, following information is showed more on the display:
In regeneration status – Regeneration phase display
In regeneration status – Stand-by state display
A column supporting B one
B column supporting A one
Page 10