Pentair SIATA SFE-EV PRO Manual De Instrucciones página 9

4.3.2 Duplex configuration
When controller is programmed for a volumetric control mode (delayed or immediate regeneration), column
in service (A)

Time of day: xx:xx with the central ":" flashing.

Day of the week – from 1 to 7
Alternating with

Remaining treatable volume.
Pressing once the button, column in regeneration/stand-by (B)

Treatable volume (when it goes in service mode)
Alternating with

Regeneration phase
Or
 Stand-by state
In service status – Time clock display
In service status – Volume display
In regeneration status – Volume display
Page 9