Accept / Reject Calls - Silvercrest 3.0 SFA 30 C1 Manual Del Usuario E Información De Servicio

SilverCrest SFA 30 C1

Accept / reject calls


The hands-free kit rings for an incoming call. The LED indicator (4) rapidly flashes blue when the telephone
connection is established. Answer the call by briefly pressing the multifunction button (2). Once the telephone
connection is established, the LED indicator (4) flashes blue once followed by a long pause. If the
multifunction button (2) is pressed for approx. two seconds, the call can be transferred to the mobile phone.
The call can then also be subsequently retrieved in the same manner.

To reject the call, press the multifunction button (2) for approx. 2 seconds until a beep sounds.
If two mobile phones are connected to the hands-free kit at the same time and a call is already being taken
via the hand-free kit, a call to the second mobile phone is handled as follows: the second call is transferred
to the hands-free kit as soon as it is accepted on the mobile phone. The first call is put on hold until the
second call has finished. Then the first call can be continued via the hands-free kit.
90 - English