Technical Specifications - koban KDP-DALI 01 Manual De Instrucciones

Technical specifications

Rated Voltage
Output
Power
Consumption
Auto Off Time
Adjustment
Lux Adjustment
Load on time
in standby mode
Load on
illumination
in standby mode
Detection Range
Operating
Temperature
Environmental
Protection
Installation and assembly of electrical equipment must be carried
out by qualified electricians.
Contact a qualified electrician in the event of fault or break down.
www.grupotemper.com
Presence detector for DALi lighting control
230V~±10% 50 / 60Hz
Max. 50pcs DALI electronic ballasts or LED drivers
can be connected
Approx. 0.5W
Adjustable from approx. 1min to 60min and Test
Adjustable from approx.5Lux to 2000Lux and"
(learning range:5Lux to 2000Lux)
3 precise adjustments: 5min, 10min,
15min and ∞
3 precise adjustments: 10%, 20%, 30% and OFF
(Load is off in standby mode)
360o circular, up to Φ7m at height of 2.5m
-20 °C to +50 °C
IP44
KDP-DALI 01
"
Instructions manual | 27