koban KDP-DALI 01 Manual De Instrucciones página 95

IR remote control function:
The KDP-DALI 01 / KDP-DALI 01-C has only one channel (e.g.DA1), which
means the DA2 is invalid for setting.
Button
To set load on for 8hrs
•
By pressing "
for 8hrs.
•
Load will be turned off after 8hrs and return to auto mode. Or
press "
this period, detector will return to auto mode.
Or switching off power supply of presence detector for 5sec and
re-supply it again to lead detector to auto mode.
•
Load can be led to off mode by pressing "
mode.
•
Pressing "
•
Under unlocked status ,by pressing "
to select desired channel for value setting, then press "
button to switch load on for 8hrs. If press "
without selecting channel, both DA1 and DA2 will keep on 8hrs
simultaneously.permanecerão ligados simultaneamente por 8
horas.
To set load off for 8hrs
•
By pressing "
turned off for 8hrs.
•
Detector will return to auto mode after 8hrs. Or press "
button again to exit this "8hrs off mode" during this period,
detector will return to auto mode.
Or switching off power supply of presence detector for 5sec and
re-supply it again to lead detector to auto mode.
•
Load can be led to on mode by pressing "
mode.
•
Pressing "
•
Under unlocked status by pressing "
select desired channel for value setting, then press "
switch load off for 8hrs. If press "
selecting channel, both DA1and DA2 will turn off for 8hrs
simultaneously.permanecerão ligados simultaneamente por 8
horas.
www.grupotemper.com
Presence detector for DALi lighting control
NOTE
" button, the load of detector will be turned on
" button again to exit this "8hrs on mode" during
" is inactive under lock mode.
" button, the load connected to detector will be
" is inactive under lock mode.
Function
" or "
" button under off
" or "
" button directly without
Instructions manual |
KDP-DALI 01
" button under on
" button firstly
"
" button directly
"
" button firstly to
" button to
43