Amann Girrbach Ceramill map 100 Instrucciones Para La Instalacion Uso Y Manutencion página 13

1. Connect the two enclosed USB cables to the
scanner and the PC.
2. Plug the Ceramill Mind Dongle in a USB port on
the reverse of PC .
B
3. Connect the power cable to the network
connection on the scanner
power supply plug.
4. Connect power cable to the network connection
of PC as well as to a power supply plug.
A
5. PC connection with a network cable and the
D
Internet router/modem.
6. Switch on scanner at main switch
7. Switch-on PC.
PC InstaLLatIons
For protection of the PC please install the added
anti virus programm. Insert the CD and follow
the instructions.
Q u I C K G u I D e I n s ta L L at I o n
For Installation please login with:
Username: Administrator
Pass: ceramill mall
After restart, the PC switches to user
B
"cadcam"
No password available, can be chosen indivdually
@
Language selection
The factory default language for the Ceramill
Digital System is English. For selection of the
desired language open, after starting the PC, the
"Manual Language Selector" on the desktop and
follow the instructions.
The PCs are shipped with a basic installation.
as well as to a The Ceramill Mind and Ceramill Map software is
!
installed by the user. To this end, successively
insert the CDs provided (Ceramill Mind and Cera-
mill Map) and follow the installation instructions
which are likewise on the CDs.
. Installation sequence:
#
1. Ceramill Mind
2. Ceramill Map
Attention: Login as administrator required
For switching to the desired language for the
installed software components, please re-run the
Language Selector and select the installed scanner.
soFtware InstaLLatIon
GB
13