Yeedi 2 hybrid Manual De Instrucciones página 22

No. Malfunction
Robot cannot return to the
3
Docking Station.
Robot returns to the Docking
4 Station before it has finished
cleaning.
Robot gets stuck while working
5
and stops.
Robot makes much noise when
6
cleaning.
22
EN
Possible Causes
The Docking Station is not correctly placed.
The Docking Station is disconnected or
moved.
Robot is working in a dark environment.
Robot is paused for more than 60 minutes.
Robot did not start cleaning from the Docking
Station.
Robot is working in a dark environment.
When the battery gets low, Robot
automatically switches to Return to Charger
Mode and returns to the Docking Station to
recharge itself.
Working time varies according to floor
surface, room complexity and the Cleaning
Mode selected.
The cleaning area is not tidy.
Robot is tangled with something on the floor
(electrical wires, curtains, Carpet fringing, etc.).
The brushes are tangled, or the dust bin is
stuck.
Solutions
Refer to section 3.2 to correctly place the Docking
Station.
Please check if the Docking Station is connected to
power. Do not move the Docking Station manually.
Make sure to use Robot in a well illuminated environment.
Avoid pausing Robot for over 60 minutes.
Make sure Robot starts cleaning from the Docking
Station.
Make sure to use Robot in a well illuminated environment.
This is normal. No solution necessary.
This is normal. No solution necessary.
Remove small objects from the floor and tidy up the
cleaning area before Robot starts cleaning.
Robot will try various ways to free itself. If it is
unsuccessful, manually remove the obstacles and restart.
Clear the debris stuck regularly.