sensor on the tank (6) rotating it carefully
WARNING!
netic ring has been inserted correctly into the
11. Insert the removable essence holder
(4) into the lid (1) making sure that it is
mounted to the special supports provid-
12. Clean the outer surfaces of the device
not use abrasive products, detergents,
alcohol, solvents or similar products as
they may cause permanent damages to
the surfaces.
13. In order to use the device again, repeat
the procedure from step 5 to step 8
OPERATIONS and repeat the procedure
ING THE DEVICE ON.
WARNING! If you intend not to use the hu-
midifier after having cleaned it, store the de-
vice and all its components in a clean and dry
place, protected against dust, direct sun light
tank (6).
PRELIMINARY
STANDBY / TURN-
-
33