NOTE: The dirt tank may be washed in warm water with a mild detergent. Make
sure it is completely dry before replacing.
CLEANING OR REPLACING THE FILTER
The key to maximum performance is having a clean filter. Cleaning the filter after
each use will help your vacuum operate at peak efficiency.
To clean filter
l
Turn power off and unplug unit.
l
Remove the dirt container from the unit, as directed previously.
l
Remove filter and tap firmly against the inside of a waste container, removing any
visible dirt.
l
Replace filter back into the dirt container and attach dirt container to the base of
the unit. Slide the lever to your right to lock.
NOTE: After heavy usage, you may clean the pleated filter by washing it gently
by hand.
REPLACING THE WATER FILTER
It is recommended to fill your unit with distilled water only. Periodically check
your water filter. When the green grains turn blue, change your water filter. If the
filter is not changed at the appropriate time, calcium deposits may accumulate
on the heater, causing damage or reduced performance.
Strainer
Dust cup