Display Brightness - Bushnell ELITE 1M Manual Del Usuario

MENU SETUP – SELECTION OF DISPLAY BRIGHTNESS, RIFLE, REGULAR MODES, UNIT OF MEASURE, SIGHT-IN DISTANCE AND BALLISTIC
CORRECTION

DISPLAY BRIGHTNESS

Vivid Display Technology™ dramatically improves contrast, clarity and light transmission while increasing brightness
of the digital readout, making distance readings legible in low light environments.
There are four intensity settings to choose from and this is the first setting within the SETUP menu. Press the MODE
button for 3 seconds to get into the SETUP menu. The existing brightness setting will be flashing (i.e.
3, or
), pressing the MODE button will toggle between the four brightness settings. "
intensity while "
Simply press the MODE button until the desired brightness setting is displayed and select by pressing and releasing
the POWER button.
There are two ARC (Angle Range Compensation) modes and one REGULAR mode. The two ARC modes are RIFLE
HD mode and RIFLE mode.
To select between these modes, first turn the unit "ON" by pressing and releasing the POWER button. Next, press
and hold the MODE button for three seconds to get into the SETUP menu. The brightness is displayed first and
can be changed by pressing the MODE button or accepted by pressing the POWER button. Then press the power
button until you see the existing compensation mode indicated by either the "Rifle" and "HD" symbols (
the "Rifle" symbol (
lit and the message (
12
" is the brightest.
) lit with one of the ballistic groups (A thru J) displayed and flashing, or no indicators
) flashing.
1, 2,
1" is the lowest
+HD),