Characteristics Of Lubricants; Tire Pressure; Quantity Of Lubricants - Storti Frasto Tornado 9-11 Manual Empleo Y Mantenimiento

CHARACTERISTICS OF LUBRICANTS

Description
Hydraulic oil
Reduction unit (screw) oil
Grease
Hydraulic oil for low-temperature
operating conditions

TIRE PRESSURE

Description
225/70 R15 tandem
30.11 R14.5
215/75 R17.5 tandem
QUANTITY OF LUBRICANT
Reduction unit with gearshift
Reduction unit without gearshift
Warning: Never climb up on the machine. Use a safe ladder or pedestal in order to top up or replace hydrau-
lic oil and to grease the grease points on the machine.
Warning: Worn out oil that is removed from the machine and that is to be replaced must be disposed of accor-
ding to local waste disposal codes.
Warning: Safety equipment must be used for all maintenance or repair.
Note: All maintenance procedures must be done with the machine detached from the tractor, resting on a flat
stable surface and with wheels clamped in place and the support foot firmly anchored.
(With the safety cock closed when the machine has a hydraulic foot; with the clamp on the lever when the
machine has a mechanical foot).
105
Type
AGIP OSO 46
ESSO NUTO H 46
MOBIL D T E 25
TOTAL AZZOLLA 46
SHELL TELLUS 46
AGIP BLASIA 220
ESSO SPARTAN EP 220
MOBIL GEAR 630
SHELL MACOMA R 220
TOTAL CARTER EP 220
AGIP MU 2
ARNICA 22
bar
8
8
8
Liters
Liters
Order code
98000000
98000001
98000002
98000011
Order code
99100101
99100098
99100097
22
14