Key Defi Nitions; Fit The Bark Control Collar - Innotek 11122 Manual De Funcionamiento

Key Defi nitions
Spray Nozzle: Where the
spray ejects when your dog's
bark is detected.
Microphone: Detects the sound
of your dog's bark.
Refi ll Port: Where the spray
is refi lled.
On/Off Switch: Turns the collar
on and off.
Battery Door: Used to
enclose battery.

Fit the Bark Control Collar

Important: The proper fi t and placement of your Anti-Bark Spray
Collar™ is important for effective operation.
To assure a proper fi t, please follow these steps:
1. Make sure that the Anti-Bark Spray Collar™ is turned off.
2. Start with your dog standing comfortably.
3. Remove all other collars your dog may be wearing and place
the Anti-Bark Spray Collar™ around his neck.
Adjust the spray collar onto the dog's neck
with the Microphone's opening facing inward.
Direct the Spray Nozzle toward the dog's snout.
Note: It is sometimes necessary to trim the hair
around the dog's neck for better spray effect.
4. Check the tightness of the Anti-Bark Spray
Collar™ by inserting one fi nger between the
collar and the back of the dog's neck. The fi t
should be snug but not constricting.
6
Spray
Nozzle
(Bottom)
On/Off
Switch
Do not shave the pet's neck
as this may increase the risk
of skin irritation.
www.innotek.net
Battery
Door
Refill
Port
(Back)
Microphone
YES
NO